Subaru Crosstrek Owners Manual: Maintenance and service
- Maintenance schedule
- Maintenance precautions
- Before checking or servicing in the engine compartment
- When checking or servicing in the engine compartment
- Engine hood
- Engine compartment overview
- Engine oil
- Engine oil consumption
- Checking the oil level
- Changing the oil and oil filter
- Recommended grade and viscosity
- Synthetic oil
- Cooling system
- Air cleaner element
- Spark plugs
- Drive belts
- Manual transmission oil
- Continuously variable transmission fluid
- Front differential gear oil (CVT models) and rear differential gear oil
- Brake fluid
- Clutch fluid (MT models)
- Brake booster
- Brake pedal
- Clutch pedal (MT models)
- Hill start assist system
- Replacement of brake pad and lining
- Parking brake stroke
- Tires and wheels
- Types of tires
- Tire pressure monitoring system (TPMS) (if equipped)
- Tire inspection
- Tire pressures and wear
- Wheel balance
- Wear indicators
- Tire rotation direction mark
- Tire rotation
- Tire replacement
- Wheel replacement
- Aluminum wheels
- Windshield washer fluid
- Replacement of wiper blades
- Windshield wiper blade assembly
- Windshield wiper blade rubber
- Rear window wiper blade assembly
- Rear window wiper blade rubber
- Battery
- Fuses
- Installation of accessories
- Replacing bulbs
- Headlights (models with HID headlights)
- Headlights (models without HID headlights)
- Rear combination lights
- License plate light
- Map light
- Dome light and cargo area light
- Replacing key battery
Monitor (if equipped)
To clean the audio/navigation/multi function
display monitor, wipe it with a silicone
cloth or with a soft cloth. If the monitor is
extremely dirty, clean it with a soft cloth
moistened with neutr ...
Maintenance schedule
U.S. models
The scheduled maintenance items required
to be serviced at regular intervals
are shown in the "Warranty and Maintenance
Booklet". For details, read the
separate "Warranty and Maintena ...
Other materials:
Installation
POWER ASSISTED SYSTEM (POWER STEERING) > Universal JointINSTALLATION1. Before installation, check the universal joint assembly - steering. Universal Joint > INSPECTION">2. Adjust the tilt position of the column assembly - steering to the neutral position and lock the tilt lever.3. Ali ...
Service diagnostics mode Operation
ENTERTAINMENT > Service Diagnostics ModeOPERATIONNOTE:Installed only to model with 7 inch display.1. PROCEDURE TO SWITCH TO SERVICE DIAGNOSTICS MODE1. Turn the ignition switch to ACC.2. After turning the ignition switch to ACC and wait for 20 seconds or more, press the button (b) five times with ...
Preparation tool
AIRBAG SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOLCAUTION:To measure the voltage and resistance of airbag system component, be sure to use the specified test harness.1. SPECIAL TOOL• SUBARU SELECT MONITORILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Use ...
