Subaru Crosstrek Owners Manual: Engine oil
CAUTION
- If the level gauge cannot be pulled out easily, twist the level gauge right and left, then gently pull it out. Otherwise, you may be injured accidentally straining yourself.
- Use only engine oil with the recommended grade and viscosity.
- Be careful not to spill engine oil when adding it. If oil touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If engine oil gets on the exhaust pipe, be sure to wipe it off.
- Engine oil consumption
- Checking the oil level
- Changing the oil and oil filter
- Recommended grade and viscosity
- Synthetic oil
Engine compartment overview
Brake fluid reservoir/Clutch fluid reservoir
(MT)
Fuse box
Battery
Windshield washer tank
Engine oil filler cap
Engine coolant reservoir
Radiator cap
Engine oil filter
Engine ...
Engine oil consumption
Some engine oil will be consumed while
driving. The rate of consumption can be
affected by such factors as transmission
type, driving style, terrain and temperature.
Under the following conditio ...
Other materials:
Dtc p0752 shift solenoid "a" stuck on
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0752 SHIFT SOLENOID "A" STUCK ONDTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Acceleration is poor during standi ...
Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Manual Transmission AssemblyREMOVAL1. Disconnect the ground cable from battery.2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).4. Loosen the clamp (C) which connects the ...
Disassembly
EXHAUST(H4DO) > Front Exhaust PipeDISASSEMBLY1. Remove the front oxygen (A/F) sensor and rear oxygen sensor from front exhaust pipe. Front Oxygen (A/F) Sensor > REMOVAL"> Rear Oxygen Sensor > REMOVAL">2. Remove the center exhaust pipe from the front exhaust pipe.3. Remove ...
