Subaru Crosstrek Owners Manual: Replacing key battery
The access key / transmitter battery may be discharged under the following conditions.
- The operation of the keyless access function is unstable
- The operating distance of the remote keyless entry system is unstable
- The transmitter does not operate properly when used within the standard distance
Replace the battery with a new one.
Dome light and cargo area light
Dome light
Cargo area light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall th ...
Safety precautions
CAUTION
Do not let dust, oil or water get on
or in the access key/transmitter
when replacing battery.
Be careful not to touch or damage
the printed circuit board in
the access key/transm ...
Other materials:
Operation
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Subaru Select MonitorOPERATION• For detailed operation procedures, refer to “Application help”.• If the combination meter or MFD can not communicate with Subaru Select Monitor, perform the “Communication for Initializing Im ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorREMOVAL1. Disconnect the ground cable from battery. Battery > REMOVAL">2. Remove the ambient sensor.(1) Disconnect the connector.(2) Release the claws, and then remove the ambient sensor from the bracket. ...
Installation
LUBRICATION(H4DO) > Engine Oil FilterINSTALLATION1. OIL FILTERCAUTION:Do not tighten excessively, or oil may leak.1. Clean the oil filter installation surface.2. Obtain a new oil filter and apply a thin coat of engine oil to the seal rubber.3. Install the oil filter by turning it by hand, being c ...
