Subaru Ascent 2018-2026 Owner's Manual: Keys and doors
- Keys
- Keyless access with push-button start system
- Safety precautions
- Locking and unlocking by holding the access key fob
- Unlock using PIN Code Access
- Power saving function
- Disabling keyless access function
- Selecting audible signal operation
- Immobilizer
- Remote keyless entry system
- Door locks
- Locking and unlocking from the outside
- Locking and unlocking from the inside
- Automatic door locking/unlocking
- Key lock-in prevention function
- Battery drainage reduction function
- Alarm system
- Child safety locks
- Windows
- Rear gate
- Moonroof
- Rear door window sunshades
How to contact the vehicle manufacturer concerning modifications for persons
with disabilities that may affect the advanced airbag system
Any modifications to the Subaru Ascent—especially those involving seats, seatbelts,
front structure, steering components, suspension, or floor panels—may directly impact
the operation of the a ...
Keys
NOTE
For Subaru Ascent models equipped with the "keyless access with push-button
start system", refer to the dedicated section for detailed operation and advanced
functionality.
The Su ...
Other materials:
Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter CaseASSEMBLY1. Install the oil drain plug.Tightening torque:70 N·m (7.1 kgf-m, 51.6 ft-lb)2. Install the overflow drain plug.NOTE:Overflow plug of differential gear oil is temporarily attached.3. Install all plugs.NOTE:Use new O-rings.T ...
Adjustment
SECURITY AND LOCKS > Impact SensorADJUSTMENT1. CHECK IMPACT SENSOR1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the windows.3. Close all the doors and rear gate. Leave open the front hood.4. Press the LOCK button of the keyless transmitter or access ...
Dtc p0125 insufficient coolant temperature for closed loop fuel control
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0125 INSUFFICIENT COOLANT TEMPERATURE FOR CLOSED LOOP FUEL CONTROLDTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:Engine does not return to idle.CAUTION:A ...
