WARNING
When operating the moonroof in your Subaru Ascent, never allow any part of a person’s body—such as hands, arms, or head—or any external objects to extend outside the opening. This safety precaution is critical, as serious injury may occur under various driving conditions.
To minimize the risk of serious injury caused by entrapment or external impact, always follow these essential safety guidelines without exception when using the Subaru Ascent moonroof system.
CAUTION
The Subaru Ascent moonroof is designed with both tilting and sliding capabilities, offering enhanced ventilation and comfort for passengers.
For proper operation, the moonroof system in the Subaru Ascent functions only when the ignition switch is set to the "ON" position.

To automatically open or close the sunshade in your Subaru Ascent, slide and briefly hold the switch toward the desired direction, then release it to activate the automatic movement.
If you wish to stop the sunshade midway, simply slide the switch in either direction again to interrupt the motion.
Tilting moonroof

To tilt the moonroof upward or return it to the closed position in the Subaru Ascent, press the designated moonroof switch.
If the sunshade is closed beyond the halfway point when the switch is activated, it will automatically retract to a half-open position for improved usability.
NOTE
Always release the switch once the moonroof has reached its fully opened or closed position. Continuous operation may lead to unnecessary wear or potential damage to the Subaru Ascent moonroof mechanism.
Sliding moonroof

To open the moonroof: In the Subaru Ascent, slide and hold the moonroof switch toward the open position. The glass panel will move back and pause slightly before reaching the fully open position to help minimize wind noise and cabin turbulence.
To fully open the moonroof, slide the switch once again in the same direction.
To close the moonroof: Slide and hold the switch toward the close position. The moonroof will close and temporarily stop at the tilt-up position.
To completely close the moonroof, repeat the action by sliding and holding the switch again.
To stop the moonroof at any intermediate position, slide the switch in either direction.
NOTE
Anti-entrapment function
The Subaru Ascent moonroof is equipped with an advanced anti-entrapment safety system. If a significant object is detected between the glass panel and the roof frame during closing, the system will automatically reverse the moonroof to the fully open position and stop operation. Additionally, strong impacts or vibrations may trigger this feature even if no object is present.
CAUTION
Never attempt to test the anti-entrapment system using fingers, hands, or any part of your body under any circumstances.
Additional note: Regular inspection and proper operation of the Subaru Ascent moonroof system will ensure long-term reliability, safety, and maximum driving comfort in all weather conditions.
Reverse functionWiring diagram
LIGHTING SYSTEM > Interior Light SystemWIRING DIAGRAMRefer to “Interior Light System” in the wiring diagram.• Model without EyeSight: Interior Light System > WIRING DIAGRAM">• Model with EyeSight: Interior Light System > WIRING DIAGRAM"> ...
Dtc u0122 lost communication with vehicle dynamics control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULEDTC DETECTING CONDITION:No data from VDCCM is received.TROUBLE SYMPTOM:ABS warning light and VDC warning light illuminate.STEPCHECKYESNO1.CHECK PERFOR ...
Adjustment
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check SleeveADJUSTMENT1. NEUTRAL POSITION ADJUSTMENT1. Shift the gear into 3rd gear position.2. Because of the return spring, until the arm contacts the stopper the shifter arm will feel lighter moving towards 1st/2nd gear and heavier towards th ...