Subaru Ascent 2018-2026 Owner's Manual: Selecting audible signal operation
The Subaru Ascent provides audible confirmation (electronic chirps) when locking or unlocking the vehicle. This feature can be customized or disabled through the center information display according to user preference.
Additionally, the volume level of the Subaru Ascent audible signal can be adjusted by an authorized SUBARU dealer.
Selecting hazard warning flasher operation
The Subaru Ascent also uses hazard warning flashers to visually confirm locking and unlocking actions. This function can be turned off or adjusted through the vehicle settings menu or by consulting a SUBARU dealer.
Warning chimes and warning indicator
The Subaru Ascent keyless access with push-button start system is equipped with warning chimes and visual indicators on the instrument cluster. These alerts are designed to prevent improper operation and enhance vehicle security against unauthorized access.
When access key fob does not operate properly
Refer to the Subaru Ascent troubleshooting section for guidance if the access key fob does not function correctly.
Replacing battery of access key fob
Battery replacement procedures for the Subaru Ascent key fob are outlined in the corresponding maintenance section.
Replacing access key fob
For replacement or additional Subaru Ascent key fobs, contact an authorized SUBARU dealer to ensure proper programming and compatibility.
Certification for keyless access with push-button start system
- U.S.-spec. models
FCC ID: HYQ14AKB
FCC ID: Y8PSU19S-3
FCC ID: Y8PSSPIMB02
CAUTION
FCC WARNING
Unauthorized changes or modifications to Subaru Ascent keyless access system components may void the user's authority to operate the equipment.
NOTE
This Subaru Ascent device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) the device may not cause harmful interference, and (2) it must accept any interference received, including interference that may affect performance.
Disabling keyless access function
WARNING
If you use an implanted pacemaker or defibrillator, it is strongly recommended
to disable the Subaru Ascent keyless access function by following the procedure
described in the section &qu ...
Immobilizer
The Subaru Ascent is equipped with an advanced immobilizer system designed to
significantly reduce the risk of unauthorized engine start. This security feature
ensures that only keys or access key ...
Other materials:
Removal
LUBRICATION(H4DO) > Oil Level SwitchREMOVAL1. Open the front hood, and make alignment marks (A) on the front hood striker and the front hood using a marker pen.2. Remove the front hood striker from the front hood.3. Change the front hood stay position from (A) to (B), and completely open the fron ...
Using the voice command system
Steering switch
Talk switch
Action
Function
Press
Start the voice command
system.
Press and hold
Cancel voice recognition.
Microphone
Type A
Type B
It is unnecessary to speak directly into the
microphone when giving a command.
NOTE
Wait ...
Installation
EXTERIOR BODY PANELS > Rear Sealing CoverINSTALLATIONCAUTION:• If the sealing cover - rear door gets broken, replace it with a new part.• Apply a butyl tape evenly.• Attach the sealing cover - rear door, keeping it from becoming wrinkled.• If the butyl tape is applied unev ...
