BODY CONTROL SYSTEM (DIAGNOSTICS) > General Description
INSPECTION
Before performing diagnosis, check the following items which might affect body control system problems.
1. Check the battery. Battery">
2. Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out.
3. Check the connecting condition of harness and harness connector.
4. Confirm settings of body integrated unit are corresponded to vehicle equipment. Registration Body Integrated Unit > OPERATION">
5. Make sure that the User Customizing of the body integrated unit matches the vehicle equipment. User Customizing > OPERATION">
6. Confirm “Factory initial setting” of body integrated unit registrations is “Market”.
General diagnostic table Inspection
CLUTCH SYSTEM > General Diagnostic TableINSPECTION1. CLUTCHSymptomsPossible causeCorrective action1. Clutch slippageIt is hard to perceive clutch slippage in the early stage, but pay attention to the following symptoms.• Engine temporarily speeds up when the accelerator ON immediately after ...
Clear memory mode Operation
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Sele ...
Anniversary setting
1. Perform the preparation steps according
to "Preparation for date setting" 3-
56.
2. Operate the "
" or "
" switch to
select the "Anniversary" item. Then push
the
button.
3. Select an entry in the list to set by
operating the "
"
or "
"
switch. Then
push the ...