Subaru Ascent 2018-2026 Owner's Manual: Disarming the system

To deactivate the Subaru Ascent alarm system, perform one of the following procedures:

• Press any button on the Subaru Ascent access key fob or remote transmitter briefly (less than 2 seconds).
• For Subaru Ascent models equipped with keyless access, carry the access key fob and perform one of the following actions:
  • Grip the front door handle to unlock the vehicle.
  • Press the rear gate opener button.
  • Use the Subaru Ascent PIN code access feature.

After disarming, the Subaru Ascent security indicator light will change its flashing pattern to a slower interval (approximately once every 3 seconds), indicating that the system is no longer active.

Emergency disarming

For Subaru Ascent models equipped with keyless access and push-button start: If the system cannot be disarmed using the access key fob (for example, due to battery failure or damage), refer to the procedure in the "Switching power status" section.

For Subaru Ascent models without keyless access: The alarm system can be deactivated by inserting a registered key and turning the ignition switch from the "LOCK"/"OFF" position to the "ON" position.

NOTE

If the Subaru Ascent key fob or remote transmitter battery becomes weak, replace it immediately to ensure reliable operation of the alarm system and prevent unexpected issues.

Understanding how to properly arm and disarm the Subaru Ascent alarm system enhances vehicle security and ensures dependable protection in everyday situations.