Subaru Crosstrek manuals

Subaru Ascent 2018-2026 Owner's Manual: SRS airbag system warning light

WARNING

If the SRS airbag system warning light in your Subaru Ascent shows any abnormal behavior, immediately stop the vehicle in a safe location and contact an authorized SUBARU dealer for inspection. Failure to properly diagnose and repair the system may result in the seatbelt pretensioners and/or SRS airbags not deploying correctly during a collision, significantly increasing the risk of injury.

For more detailed information about the components monitored by this system in the Subaru Ascent, refer to the section "SRS airbag system monitors".

Front passenger's frontal airbag ON and OFF indicator lights

Subaru Ascent front passenger airbag ON and OFF indicator light positions

Subaru Ascent front passenger airbag ON indicator light Front passenger's frontal airbag ON indicator lights

Subaru Ascent front passenger airbag OFF indicator light Front passenger's frontal airbag OFF indicator lights

The front passenger airbag ON and OFF indicators in the Subaru Ascent provide a clear visual status of the front passenger’s SRS frontal airbag system.

These indicators are positioned as shown in the illustration and are designed to inform the driver whether the airbag is currently active or deactivated.

When the ignition switch of the Subaru Ascent is turned to the "ON" position, both the ON and OFF indicator lights will illuminate simultaneously for approximately 6 seconds as part of a system self-check.

After this diagnostic phase, both lights will turn off briefly for about 2 seconds. Then, based on input from the Subaru Ascent advanced frontal airbag system sensors, one of the indicators will illuminate to display the current airbag status.

If the front passenger airbag is active, the ON indicator light will remain illuminated while the OFF indicator light stays off.

If the system determines that the front passenger airbag should be deactivated, the OFF indicator light will illuminate while the ON indicator remains off.

If, after the system check, both the ON and OFF indicator lights in the Subaru Ascent remain on simultaneously or both remain off, this indicates a malfunction in the airbag system. In such a case, immediately contact an authorized SUBARU dealer for a comprehensive inspection and necessary repairs.

Additional note: The Subaru Ascent SRS airbag system is a critical safety component, and proper monitoring of its warning and indicator lights ensures maximum protection for all occupants in the event of an accident.

Seatbelt warning light and chime
The Subaru Ascent is equipped with an advanced seatbelt reminder system for both the driver and front passenger seats, fully compliant with modern safety regulations and designed to enhance occupa ...

CHECK ENGINE warning light/Malfunction indicator light
CAUTION If the CHECK ENGINE warning light in your Subaru Ascent turns on while driving, it is essential to have the vehicle inspected and repaired by an authorized SUBARU dealer as soon as possib ...

Other materials:

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CompressorREMOVAL1. CROSSTREK MODEL1. Perform compressor oil return operation. Compressor Oil > PROCEDURE">2. Turn the A/C switch to OFF, and turn the ignition switch to OFF.3. Using the refrigerant recovery system, discharge refrigerant. Re ...

Disarming the system
To deactivate the Subaru Ascent alarm system, perform one of the following procedures: Press any button on the Subaru Ascent access key fob or remote transmitter briefly (less than 2 seconds). For Subaru Ascent models equipped with keyless access, carry the access key fob and perform one ...

Models without multi function display
NOTE For models with information display (black and white), refer to "Information display" The U.S.-spec models are not equipped with the multi function display. The other models may be equipped with the multi function display or not, depending on the model. Safety precautions WARNING Alw ...

© 2016-2026 Copyright www.sucross.com