Subaru Ascent 2018-2026 Owner's Manual: Warning and indicator lights
- Initial illumination for system check
- Seatbelt warning light and chime
- SRS airbag system warning light
- CHECK ENGINE warning light/Malfunction indicator light
- Brake system warning light
- Electronic parking brake indicator light
- Auto Vehicle Hold indicator light
- Vehicle Dynamics Control warning light/ Vehicle Dynamics Control operation indicator light
- Warning chimes and warning indicator of he keyless access with push-button start system
- Security indicator light
- Warning chimes and warning indicator of he keyless access with push-button start system
- Security indicator light
- Select lever/gear position indicator
- X-MODE indicator
Illumination brightness control
In the Subaru Ascent, the brightness level of the combination meter and the center
information display is automatically reduced under specific lighting conditions
to ensure optimal visibility ...
Initial illumination for system check
When the ignition switch of the Subaru Ascent is turned to the "ON" position,
multiple warning and indicator lights illuminate briefly and then turn off. This
built-in self-check confirm ...
Other materials:
Installation
COMMUNICATION SYSTEM > HornINSTALLATIONCAUTION:Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).Install each part in the reverse order of removal.Tightening torque:Horn a ...
Dtc p2401 evap system leak detection pump control circuit low
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2401 EVAP SYSTEM LEAK DETECTION PUMP CONTROL CIRCUIT LOWDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Main RelayREMOVAL1. Disconnect the ground cable from battery.2. Remove the glove box. Glove Box > REMOVAL">3. Remove the main relay from relay block. ...
