Subaru Ascent 2018-2026 Owner's Manual: Maintenance and service
- Maintenance schedule
- Maintenance precautions
- Engine hood
- Engine compartment overview
- Engine oil
- Cooling system
- Air cleaner element
- Spark plugs
- Brake fluid
- Replacement of brake pad
- Tires and wheels
- Windshield washer fluid
- Replacement of wiper blades
- Battery
- Fuses
- Replacing bulbs
- Replacing key battery
Cleaning the interior
To maintain a clean and refined cabin environment in your Subaru Ascent, use
a soft, slightly damp cloth to wipe surfaces such as the climate control panel,
audio system, instrument panel, center ...
Maintenance schedule
U.S. models
For Subaru Ascent vehicles intended for the U.S. market, all required maintenance
procedures and service intervals are подробно outlined in the "Warranty and Maintenance
...
Other materials:
Removal
DRIVE SHAFT SYSTEM > Rear AxleREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle, and then remove the rear wheels.3. Remove the axle nut.CAUTION:Do not loosen the axle nut while the rear axle is loaded. Doing so may damage the hub unit bearing.(1) Lift the c ...
Removal
LIGHTING SYSTEM > Rear Combination Light AssemblyREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear ...
Inspection
LIGHTING SYSTEM > Light Control SensorINSPECTION1. Turn the ignition switch to ON.2. Set the lighting switch to AUTO position.3. Check the voltage between the sensor terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandardConnection diagram2 (+) — 1 (−)Measure th ...
