Subaru Crosstrek manuals

Subaru Ascent 2018-2026 Owner's Manual: In case of emergency

Trailer towing tips
CAUTION On Subaru Ascent models equipped with BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert), it is recommended to deactivate the "Rear Vehicle Detection (BSD/RCTA)" ...

If you park your vehicle in case of an emergency
When an unexpected situation occurs and you must stop your Subaru Ascent, always activate the hazard warning flashers to clearly alert other road users, regardless of whether it is day or nigh ...

Other materials:

Installation
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > EGR CoolerINSTALLATION1. Set the gasket to the stud bolt.NOTE:Use a new gasket.2. Temporarily tighten the bolts securing the EGR cooler to the EGR control valve and the cylinder head RH, and tighten in numerical order.NOTE:Use a new gasket. ...

Relay and fuse
Inspection CRUISE CONTROL SYSTEM > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness. Location CRUISE CONTROL SYSTEM > Relay and FuseLOCATIONRelay & f ...

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Speed SensorINSPECTION1. Set the ST between the TCM and bulkhead harness.ST 18460AA040CHECK BOARD2. Set the probe of oscilloscope to the check board connector.Connector & terminalNo. 13 (+) — No. 42 (−):(A)+ probe(B)− prob ...

© 2016-2026 Copyright www.sucross.com