Driver Monitoring System ON/OFF settings
New vehicle break-in driving - the first 1,000 miles (1,600 km)Inspection
MECHANICAL(H4DO) > Cam ClearanceINSPECTION1. WHEN TIMING CHAIN ASSEMBLY IS NOT REMOVEDCAUTION:When working on the vehicle, if engine oil is spilt onto the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire.NOTE:• Inspection of cam clearance should be performed ...
Assembly
DIFFERENTIALS > Rear Differential (T-type)ASSEMBLYNOTE:• Assemble in the reverse order of disassembly.• Check and adjust each part during assembly.• Keep the shims and washers in order, so that they are not improperly installed.• Thoroughly clean the surfaces on which the ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Sub Level SensorREMOVALWARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:• Be careful not to spill fuel.• Catch the fuel from the tubes using a container or cloth.• If the fuel gauge indicates that two third ...