Subaru Crosstrek Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc u1500 keyless uart com. Malfunction
- Dtc b1016 shift lock circuit
- Dtc b1401 meter collation
- Dtc b1402 immobilizer key collation
- Dtc b1405 scu collation
- Dtc b1406 scu_eeprom
- Dtc b1407 met communication
- Dtc b1408 meter non-volatile memory
- Dtc b1409 scu communication
- Dtc b1410 transponder communication
- Dtc b1411 immobilizer antenna
- Dtc b1010 body control system (biu) malfunction
- Dtc b1011 battery control power supply
- Dtc b1012 battery backup power supply
- Dtc b1013 ignition power
- Dtc b1014 acc power
- Dtc b1015 key interlock circuit
Dtc u1500 keyless uart com. Malfunction
BODY CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U1500 KEYLESS UART COM. MALFUNCTION1. MODEL WITHOUT KEYLESS ACCESS WITH PUSH BUTTON START SYSTEMDTC de ...
Other materials:
Installation
EXTERIOR/INTERIOR TRIM > Side GarnishINSTALLATIONCAUTION:Do not reuse the garnish assembly. Deformation occurs on the garnish assembly when once removed, and this may cause improper adhesion.1. Install each part in the reverse order of removal.2. Install the garnish assembly - fender and the garn ...
Dtc b1761 occupant detection sensor mat liquid coating
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1761 OCCUPANT DETECTION SENSOR MAT LIQUID COATINGDIAGNOSIS START CONDITION:Ignition voltage is 8 V to 16 V.DTC DETECTING CONDITION:• Occupant detection sensor is spattered with fluid.• ...
To increase the speed (by the "RES/ SET" switch)
Press the "RES/SET" switch to the "RES"
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.S.-spec. models
When the difference between the actual
vehicle speed and ...
