Subaru Crosstrek Service Manual: Vdc control module and hydraulic control unit (vdccm h/u)

Location

VEHICLE DYNAMICS CONTROL (VDC) > Relay and FuseLOCATIONMain fuse boxFuse 50A (VDC CM&H/U)(A)Fuse 30A (VDC CM&H/U)(B)NOTE:For other related fuses, refer to the wiring diagram. Power Supply ...

Adjustment

VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)ADJUSTMENT1. VDC SENSOR MIDPOINT SETTING MODE (MODELS WITHOUT EyeSight)After installing, replacing or a ...

Other materials:

Accessory power outlets
Power outlet below the climate control dials Power outlet in the center console Accessory power outlets are provided below the climate control dials and in the center console. Electrical power (12V DC) from the battery is available at any of the outlets when the ignition switch is in e ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Crankshaft Position SensorREMOVAL1. Disconnect the ground cable from battery.2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move the ...

Assembly
CLUTCH SYSTEM > Master CylinderASSEMBLY1. Apply a coat of grease to the contact surfaces of the push rod and piston before installation.Grease:SILICONE GREASE G-40M or equivalent2. Assemble in the reverse order of disassembly.Tightening torque:10 N·m (1.0 kgf-m, 7.4 ft-lb) ...