Subaru Crosstrek Owners Manual: Meters and gauges
NOTE
Some of the meters and gauges on the combination meter use liquid-crystal displays. You will find their indications hard to see if you wear polarized glasses.
- Combination meter illumination
- Canceling the function for meter/gauge needle movement upon turning on the ignition switch
- Odometer
- Double trip meter
- Tachometer
- Fuel gauge
- ECO gauge (if equipped)
Hazard warning flasher
Models without multi function display
Models with multi function display
The hazard warning flasher is used to
warn other drivers when you have to park your vehicle under emergency
condit ...
Combination meter illumination
When the ignition switch is turned to the
"ON" position, various parts of the combination
meter will illuminate in the following
sequence.
1. Warning lights, indicator lights, meter
needles, gaug ...
Other materials:
General precautions when starting/stopping engine
WARNING
Never start the engine from outside
the vehicle (except when
using the remote engine start
system). It may result in an
accident.
Do not leave the engine running
in locations with poor ventilation,
such as a garage and indoors.
The exhaust gas may enter the
vehicle or i ...
Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transmission Mounting SystemREMOVAL1. PITCHING STOPPER1. Disconnect the ground cable from battery.2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).4. Loosen the clamp (C) ...
Dtc c1521 motor relay
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1521 MOTOR RELAYDTC detecting condition:• Defective motor and motor relay• Defective harness connectorTrouble symptom:• ABS does not operate.• VDC does not operate.&b ...
