The ECO gauge shows the difference between the current rate of fuel consumption and the average rate of fuel consumption since the trip meter was last reset.
If the needle of the gauge moves towards the right side, this indicates better fuel efficiency.
NOTE
Before that time, the ECO gauge does not operate.
System temporary stop indicator
System temporary stop indicator
This indicator appears when the system is
used under the following conditions.
Extremely high or low temperatures
When abnormal voltage exists for the
vehicle battery
When the radar sensor is significantly
misaligned
Once the above conditions are ...
Engine lubrication system trouble in general Inspection
LUBRICATION(H4DO) > Engine Lubrication System Trouble in GeneralINSPECTIONBefore performing diagnostics, make sure that the engine oil level is correct and no oil leakage exists.TroublePossible causeCorrective actionWarning light remains ON.a. Oil pressure switch failure Cracked diaphragm or ...
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Control Valve BodyINSPECTION• Check each part for damage or dust.• Measure the resistance of each solenoid, sensor and ground wire.NOTE:Measurement should be performed at a temperature of 20°C (68°F).• SolenoidSol ...