Installation
CLUTCH SYSTEM > Master CylinderINSTALLATION1. Install the master cylinder to the body, and connect the clutch pipe and the tank hose.Tightening torque:T1: 15 N·m (1.5 kgf-m, 11.1 ft-lb)T2: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Connect the push rod of the master cylinder, and install the ...
Removal
LIGHTING SYSTEM > Tail/Stop Light BulbREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear combinatio ...
Control screen
PHONE (Menu) screen
PHONE (Dialpad) screen
Open the "Incoming Calls" screen.
Refer to "By incoming calls"
Open the "Outgoing Calls" screen.
Refer to "By outgoing calls"
Open the "Contacts" screen. Refer to
"By contacts list
Open the dialpad screen. Refer to "By
Dialpad
O ...