Subaru Crosstrek Service Manual: Procedure
ENGINE (DIAGNOSTICS)(H4DO) > Malfunction Indicator Light
PROCEDURE
1. Activation of malfunction indicator light Malfunction Indicator Light > ACTIVATION OF MALFUNCTION INDICATOR LIGHT"> |
↓ |
2. Malfunction indicator light does not come on Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT COME ON"> |
↓ |
3. Malfunction indicator light does not go off Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT GO OFF"> |
↓ |
4. Malfunction indicator light does not blink Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT BLINK"> |
↓ |
5. Malfunction indicator light remains blinking Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT REMAINS BLINKING"> |
Malfunction indicator light remains blinking
ENGINE (DIAGNOSTICS)(H4DO) > Malfunction Indicator LightMALFUNCTION INDICATOR LIGHT REMAINS BLINKINGDiagnosis:The delivery (test) mode fuse circuit is short-circuited to ground.Trouble symptom:Malf ...
Other materials:
32
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Cancel Code32This DTC is detected out of vehicle speed range.Increase vehicle speed high enough to allow the cruise control to function, and then perform setting operation again.If cancel code is still detected after setting cruise a ...
Removal
REAR SUSPENSION > Rear Shock AbsorberREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle, and then remove the rear wheels.3. Remove the sensor assembly - headlight beam leveler. (Model with auto headlight beam leveler, left side only)CAUTION ...
Inspection
WIPER AND WASHER SYSTEMS > Front Washer Nozzle and HoseINSPECTION• Make sure the nozzle - windshield washer and the hose - windshield washer are not clogged.• Make sure the hose - windshield washer is not bent.• Check the position of the nozzle - windshield washer. Front Washer ...
