Subaru Crosstrek Service Manual: Leak check valve assembly

Component

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > General DescriptionCOMPONENT1. CANISTER, LEAK CHECK VALVE ASSEMBLY AND DRAIN SEPARATORFor structures of the canister, leak check valve assem ...

Assembly

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyASSEMBLY1. Install the bracket to the leak check valve assembly.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft ...

Other materials:

Disposal
REAR SUSPENSION > Rear Shock AbsorberDISPOSALCAUTION:• Before discarding the strut COMPL and the shock absorber COMPL, be sure to wear goggles to protect eyes from gas, oil and cutting powder.• Do not disassemble the strut COMPL and the shock absorber COMPL or throw them into flames.& ...

Operation
EyeSight (DIAGNOSTICS) > Subaru Select MonitorOPERATION1. GENERAL DESCRIPTIONFor on-board diagnosis function of the EyeSight, use the Subaru Select Monitor.The on-board diagnosis function operates in three categories, which are used depending on the type of problems.1. Diagnosis with diagnostic t ...

Inspection
BRAKE > Front Brake PadINSPECTION1. Check the pad thickness (A).NOTE:• Always replace the pads of both wheels and both sides as a set.• Replace pad clips if they are twisted or worn.• Replace the pad if there is oil or grease on it. Standard (A)Wear limit (B)Pad thickness11 mm ( ...