Subaru Crosstrek Owners Manual: Unit settings
Sound quality adjustment, screen adjustment, and information of the audio unit are displayed.
1. Press the HOME button on the audio panel.
2. Touch the "SETTINGS" key.
3. Select the items to be set.
Available setting:
- General settings: Select the
tab to
check the system software update information.
Refer to "General settings" 5-20.
- Bluetooth settings: Select the
tab to
set the Bluetooth settings. Refer to "Bluetooth
settings" 5-20. - Sound settings: Select the
tab to set
the sound quality settings. Refer to
"Sound settings" 5-20. - Display settings: Select the
tab to
set the screen settings. Refer to "Display
settings" 5-25. - SUBARU STARLINK settings (if
equipped): Select to the
tab set the
SUBARU STARLINK settings. Refer to
"SUBARU STARLINK settings" 5-26.
Selecting a function menu
Press the HOME button to display home
screen.
Item
Function
AUDIO
Select to display the main
screen of the audio source that
was selected previously.
PHONE
...
General settings
Touch the tab for the audio unit
basic
settings.
Item
Function
System
Language
Select to change the language
Button
Beeps
Select to set the sound beeps ...
Other materials:
Installation
MECHANICAL(H4DO) > Timing Chain AssemblyINSTALLATION1. TIMING CHAIN LHNOTE:• Be careful that the foreign matter is not into or onto the assembled component during installation.• Apply engine oil to all component parts of the timing chain.1. Prepare to attach the chain tensioner LH.(1) ...
Dtc b280f combination meter malfunction
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B280F COMBINATION METER MALFUNCTIONMalfunction is detected in the combination meter.DTC DETECTING CONDITION:Defective combination meterTROUBLE SYMPTOM:• All functions of EyeSight system do not operate.• ...
Removal
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyREMOVAL1. Disconnect the ground cable from battery.2. Lift up the vehicle.3. Remove the rear exhaust pipe. Rear Exhaust Pipe > REMOVAL">4. Remove the propeller shaft. Propeller Shaft > REMOVAL"& ...
