Subaru Crosstrek Service Manual: Steering switch

Location

INSTRUMENTATION/DRIVER INFO > Relay and FuseLOCATIONRelay & fuse boxFuse 10 A (combination meter, MFD)(A)NOTE:For other related fuses, refer to the wiring diagram. Power Supply Circuit"&g ...

Inspection

INSTRUMENTATION/DRIVER INFO > Steering SwitchINSPECTION1. Measure the resistance between switch terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard3 — 2 (UP)i/SET ( ...

Other materials:

Using the jack
1. Park on a hard, level surface, whenever possible, then stop the engine. 2. Apply the parking brake securely and shift the shift lever in reverse (MT models) or the select lever to the "P" (Park) position (CVT models). 3. Turn on the hazard warning flasher and unload all occupants and l ...

Inspection
SECURITY AND LOCKS > Keyless Access Outdoor AntennaINSPECTION1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATION">2. Disconnect the Subaru Select Monitor. While bringing the access key, operate the tou ...

Preparation for screen settings
1. Turn the ignition switch to the "ON" position. 2. Push and hold the button to show the selection screen. 3. After the selection screen is displayed, operate the "  " or " " switch to show the "Screen Setting" item. Then, push the button. ...