Subaru Crosstrek Service Manual: Location

Subaru Crosstrek Service Manual / Instrumentation/driver info / Relay and fuse / Location

INSTRUMENTATION/DRIVER INFO > Relay and Fuse

LOCATION

Relay & fuse box

Fuse 10 A (combination meter, MFD)

(A)

NOTE:

For other related fuses, refer to the wiring diagram. Power Supply Circuit">

Inspection

INSTRUMENTATION/DRIVER INFO > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the s ...

Steering switch

...

Other materials:

Dtc b28b7 ldp off switch
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28B7 LDP OFF SWITCHDetected when lane departure warning OFF switch circuit is not installed, open-circuited, or is stuck to ON.DTC detecting condition:• Wiring of lane departure warning OFF switch is not co ...

Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve AssemblyINSPECTION1. CHECK MOTOR1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal No. 4, and check that the valve is fully opened on LH side and the valve is fully closed on RH side.C ...

Inspection
STARTING/CHARGING SYSTEMS(H4DO) > Battery Current & Temperature SensorINSPECTION1. BATTERY CURRENT SENSORCAUTION:Pay attention to polarity when checking the resistance in the battery current sensor.Check the resistance between the battery current sensor terminals.Terminal No.Standard1 (+) and ...