Subaru Crosstrek Service Manual: Rear axle

Installation

DRIVE SHAFT SYSTEM > Propeller ShaftINSTALLATION1. Before installation, check the following items, and replace the propeller shaft assembly as necessary.• Dents or cracks on the tube surface& ...

Assembly

DRIVE SHAFT SYSTEM > Rear AxleASSEMBLY1. BUSHING - REAR AXLE HOUSINGDo not remove the bushing - rear axle housing from the rear axle housing, because it cannot be replaced. If removed, replace the ...

Other materials:

Safety precautions
WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. For models with HID low beam headlights, observe the following precautions. Not doing so carries the ...

RAB warning indicator
RAB malfunction message RAB warning indicator If a malfunction occurs within the Reverse Automatic Braking (RAB) system of the Subaru Ascent, the warning indicator and message will illuminate on the combination meter. This serves as an important alert that the system requires attenti ...

Removal
COOLING(H4DO) > Radiator Sub Fan and Fan MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake duct. Air Intake Duct > REMOVAL">3. Disconnect the connector from the sub fan motor assembly.4. Remove the bolts which hold the radiator sub fan sh ...