Subaru Crosstrek Owners Manual: Image quality and volume settings
The image quality and volume settings can be adjusted. To change the items, operate the " " or " " switch.
- Preparation for image quality and volume settings
- Contrast setting
- Screen OFF setting
- Beep volume setting
Daylight saving time setting
1. Perform the preparation steps according
to "Preparation for date setting" 3-
56.
2. Operate the "
" or "
"
switch to
select the "Daylight Saving Time" item.
Then push the
button ...
Preparation for image quality and volume settings
1. Turn the ignition switch to the "ON"
position.
2. Push and hold the button to show
the selection screen.
3. After the selection screen is displayed,
operate the "
" or "
" sw ...
Other materials:
Assembly
EXTERIOR/INTERIOR TRIM > Door TrimASSEMBLY1. Bend the claws while pushing the weather strip - door INN against the door trim so that there is no gap.CAUTION:Beware of the direction of folding the claws.(a)Rivet(b)Direction of folding claws(c)Claw bending direction: bend forward for LH side, backw ...
Removal
CLUTCH SYSTEM > Master CylinderREMOVALCAUTION:• Be careful not to spill the brake fluid. Brake fluid spilled on the vehicle body will harm the paint surface; wash it off with water and wipe clean quickly if spilled.• Before handling the airbag system components, refer to “CAUTIO ...
Automatic headlight beam leveler warning light (models with HID headlights)
This
light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the "ON"
position, have your vehicle inspected at
your SUBARU dealer.
Fr ...
