The hands-free system enables calls to be made and received without having to take your hands off the steering wheel.
This system supports Bluetooth. Bluetooth is a wireless data system that enables cell phones to be used without being connected by a cable or placed in a cradle.
The operating procedure of the phone is explained here.
WARNING
CAUTION
Do not leave your cell phone in the vehicle. The temperature inside may rise to a level that could damage the phone.
NOTE
If your cell phone does not support Bluetooth, this system cannot function.
In the following conditions, the system may not function:
When using the hands free function and other Bluetooth functions at the same time, the following problems may occur:
The other party's voice will be heard from the front speakers. The audio/ visual system will be muted during phone calls or when hands-free voice commands are used.
Talk alternately with the other party on the phone. If both parties speak at the same time, the other party may not hear what has been said. (This is not a malfunction.)
Keep call volume down. Otherwise, the other party's voice may be audible outside the vehicle and voice echo may increase. When talking on the phone, speak clearly towards the microphone.
The other party may not hear you clearly when:
(Making excessive traffic noise.)
When another phone is connected, the following registered data cannot be read:
When selling or disposing of the vehicle, initialize the data. Refer to "Unit settings"
Once initialized, the data and settings will be erased. Take extra caution when initializing the data
The voice command system supports phone commands, so dialing a phone number using your voice is possible. Refer to "Voice command system"
The images shown in this Owner's Manual are sample images. The actual images may vary depending on the market and specifications of your vehicle.
In-Car-Device setting screen
Control screenDtc u0402 invalid data received from tcm
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0402 INVALID DATA RECEIVED FROM TCMThis is detected when CAN data from TCM is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...
Adjustment
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check SleeveADJUSTMENT1. NEUTRAL POSITION ADJUSTMENT1. Shift the gear into 3rd gear position.2. Because of the return spring, until the arm contacts the stopper the shifter arm will feel lighter moving towards 1st/2nd gear and heavier towards th ...
Drain filter Specification
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Drain FilterSPECIFICATIONThe leak check valve assembly is a non-disassembled part. Do not remove the drain filter from the leak check valve assembly. Refer to “Leak Check Valve Assembly” for removal and installation procedures. ...