Subaru Crosstrek Service Manual: Front outer handle

Installation

SECURITY AND LOCKS > Front Inner RemoteINSTALLATION1. Before installation, check the following items.• Cable is free from deformation such as fray.• Grease is applied sufficiently to ca ...

Inspection

SECURITY AND LOCKS > Front Outer HandleINSPECTIONCheck if the outer handle operates normally.• If the lever is faulty, replace the handle - door outer.• If the rod is deformed, replace ...

Other materials:

Specification
CONTROL SYSTEMS > General DescriptionSPECIFICATIONItemSpecificationsSwing torque of rod against leverN (kgf, lb)3.7 (0.38, 0.83) or less ...

Information display (if equipped)
NOTE For models with color multi function display, refer to "Multi function display" Outside temperature indicator Driving information display Clock With the ignition switch in the "ACC" position, the clock appears on the display. With the ignition switch in the "ON" position, ...

Assembly
DRIVE SHAFT SYSTEM > Rear Drive ShaftASSEMBLYCAUTION:Wrap shaft splines with vinyl tape to protect the boot from scratches.NOTE:Use specified grease.Grease:BJ, EBJ side: NKG814DOJ side: NKG8141. Install the inner race to the shaft.(1) Install the boot (BJ) or boot (EBJ) in the specified position, ...