Subaru Crosstrek Service Manual: Warning light illumination pattern
- Inspection
- Hill start assist warning light does not go off
- Ebd warning light, abs warning, vdc off indicator light, vdc warning light and vdc indicator light do not come on
- Abs warning light does not go off
- Vdc warning light and vdc indicator light do not go off
- Vdc off indicator light does not go off
- Brake warning light does not go off
- Hill start assist warning light does not come on
Operation
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Subaru Select MonitorOPERATION1. HOW TO USE SUBARU SELECT MONITORFor detailed operation procedures, refer to “Application help”.2. READ CU ...
Inspection
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Warning Light Illumination PatternINSPECTION(1)Ignition switch(6)Light OFF(11)2 seconds or more(2)OFF(7)Light ON(12)Brake warning light (EBD warning l ...
Other materials:
Inspection
LIGHTING SYSTEM > Spot Map LightINSPECTION1. SPOT MAP LIGHT BULB1. Visually check the bulb for blow out.2. Check the bulb specification. General Description > SPECIFICATION">3. Replace the bulb if it is found defective.2. SPOT MAP LIGHT SWITCH1. Check the resistance between switch ter ...
Adjustment
VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)ADJUSTMENT1. VDC SENSOR MIDPOINT SETTING MODE (MODELS WITHOUT EyeSight)After installing, replacing or adjusting the following parts, perform the VDC sensor midpoint setting mode.• Steering angle se ...
Keyless access setting (models with "keyless access with pushbutton start
system")
Preparation for keyless access settings
1. Perform the preparation steps according
to "Preparation for car settings"
2. Operate the " " or "
" switch to
select the "Keyless Access Setting" item.
Then push the button.
Driver's door unlock setting
1. Perform the preparatio ...
