Subaru Crosstrek Service Manual: Tumble generator valve assembly

Subaru Crosstrek Service Manual / Fuel injection (fuel systems)(h4do) / Tumble generator valve assembly

Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve ActuatorINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new gasket.Tightening torque:6 N·m (0.6 kgf-m, 4.4 ft-lb) ...

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve AssemblyINSPECTION1. CHECK MOTOR1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal N ...

Other materials:

Inspection
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > PCV ValveINSPECTION1. PCV VALVE1. Check that the PCV valve has no deformation, cracks or other damages.2. Check that air is discharged from (B) when air is blown into (A).3. Check that air does not come out from (B) when air is blown into ( ...

Parking in cold weather
WARNING Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your vehicle if you park the vehicle in snow with the engine running. CAUTION Do not use the parking brake when parking for long periods in cold weather since it could free ...

Removal
SECURITY AND LOCKS > ReceiverREMOVALNOTE:Except for model with keyless entry1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear apron LH. Rear Quarter Trim > REMOVAL">3. Remove the receiver assembly.(1) Disconnect the connector.(2) Remove the bo ...