Subaru Crosstrek Service Manual: Specification
PARKING BRAKE > General Description
SPECIFICATION
Model | Rear disc brake | |
Type | Mechanical, drum in disc rear brakes | |
Effective drum diameter | mm (in) | 170 (6.69) |
Lining dimensions (Length ? Width ? Thickness) | mm (in) | 147.7 ? 30.0 ? 3.5 (5.81 ? 1.181 ? 0.14) |
Clearance adjustment | Manual adjustment | |
Lever stroke | Notches/N (kgf, lbf) | 7 — 8/200 (20.4, 45) |
Caution
PARKING BRAKE > General DescriptionCAUTION• Wear appropriate work clothing, including a helmet, protective goggles and protective shoes when performing any work.• Before removal, instal ...
Other materials:
Drive cycle Procedure
ENGINE (DIAGNOSTICS)(H4DO) > Drive CyclePROCEDUREIt is necessary to perform the drive cycle listed below if DTC is not found in the Inspection Mode. It is possible to complete diagnosis of the DTC by performing the indicated drive cycle. After the repair for the DTC, perform a necessary drive cyc ...
Preparation tool
LUBRICATION(H4DO) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS18332AA000OIL FILTER WRENCHUsed for removing and installing oil filter (black). (Outer diameter: 68 mm (2.68 in)) — SUBARU SELECT MONITOR 4Used for setting of each function and trouble ...
Installation
DRIVE SHAFT SYSTEM > Front AxleINSTALLATION1. Install the front drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the hub spline, and pull it into the specified position.(2) Tighten the ax ...
