Subaru Crosstrek Service Manual: Transfer case
- Center differential Note
- Extension case Note
- General description Note
- Oil seal Note
- Reduction drive gear Note
- Reduction driven gear Note
- Transfer case and extension case assembly Note
- Transfer clutch Note
- Transfer clutch pressure test Note
- Transfer drive gear Note
- Transfer driven gear Note
General description Procedure
STEERING RESPONSIVE FOG LIGHTS (DIAGNOSTICS) > General DescriptionPROCEDUREFor diagnostic procedures of the steering responsive fog light, refer to “BODY CONTROL SYSTEM (DIAGNOSTICS)”. ...
Center differential Note
TRANSFER CASE > Center DifferentialNOTEFor removal, installation and inspection, refer to “5MT” section. Center Differential"> ...
Other materials:
Installation
DRIVE SHAFT SYSTEM > Front AxleINSTALLATION1. Install the front drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the hub spline, and pull it into the specified position.(2) Tighten the ax ...
Disassembly
FRONT SUSPENSION > Front ArmDISASSEMBLY1. BUSHING FRONT - FRONT ARM1. Put an alignment mark on the front arm assembly based on the split portion of the bushing intermediate plate of the busing front - front arm.CAUTION:Always put an alignment mark for aligning the position on bushing installation ...
Adjustment
SECURITY AND LOCKS > Front Hood Lock AssemblyADJUSTMENT1. Loosen the bolt, and adjust the lock assembly - front hood while moving it up and down.2. After adjustment, tighten the bolts securely.Tightening torque:Refer to “COMPONENT” of “General Description”. General Descri ...
