TRANSFER CASE > Transfer Driven Gear
NOTE
For removal, installation and inspection, refer to “CVT” or “5MT” section.
CVT model:
Transfer Driven Gear">
5MT model:
Transfer Driven Gear">
Transfer drive gear NoteInspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Idler GearINSPECTION1. Move the reverse shifter rod toward the reverse side. Check the clearance between the reverse idler gear and the transmission case wall surface.If the value is out of specification, select the appropriate reverse shifter l ...
Inspection
GLASS/WINDOWS/MIRRORS > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and check visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Check the resistance between relay terminals.Terminal No.Inspection conditionsSpecificationCircuit1 — 2Always1 M? or more1 — 2Apply ...
Inspection
GLASS/WINDOWS/MIRRORS > Power Window SystemINSPECTIONSymptomsInspection orderAll power windows do not operate.(1) Check the fuse.(2) Check the power window relay.(3) Check the wiring harness.Particular window does not operate.(1) Check the fuse.(2) Check the switch - power window main.(3) Check t ...