Subaru Crosstrek Service Manual: Transfer clutch pressure test Note
TRANSFER CASE > Transfer Clutch Pressure Test
NOTE
For inspection, refer to the “CVT” section. Transfer Clutch Pressure Test">
Transfer clutch Note
TRANSFER CASE > Transfer ClutchNOTEFor removal, installation and inspection, refer to “CVT” section. Transfer Clutch"> ...
Transfer drive gear Note
TRANSFER CASE > Transfer Drive GearNOTEFor removal, installation and inspection, refer to “5MT” section. Transfer Drive Gear"> ...
Other materials:
Installation
LUBRICATION(H4DO) > Engine Oil FilterINSTALLATION1. OIL FILTERCAUTION:Do not tighten excessively, or oil may leak.1. Clean the oil filter installation surface.2. Obtain a new oil filter and apply a thin coat of engine oil to the seal rubber.3. Install the oil filter by turning it by hand, being c ...
Dtc p2271 o2 sensor signal biased/stuck rich bank 1 sensor 2
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2271 O2 SENSOR SIGNAL BIASED/STUCK RICH BANK 1 SENSOR 2DTC detecting condition:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Me ...
Preparation tool
ENTERTAINMENT > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to “App ...
