Location
InstallationInstallation
MECHANICAL(H4DO) > Crank SprocketINSTALLATION1. Install the crank sprocket.NOTE:The direction of installation is not specified for the crank sprocket.2. Install the timing chain. Timing Chain Assembly > INSTALLATION">3. Install the chain cover. Chain Cover > INSTALLATION"> ...
Inspection
EyeSight > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsS ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorINSPECTION1. Visually check the ambient sensor for dirt or damage, and clean or replace as necessary.2. Check the resistance between ambient sensor terminals.CAUTION:During inspection, be careful not to touch the sensor end in order to avoi ...