Subaru Crosstrek Owners Manual: Selecting audible signal operation
Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock. If desired, you may turn the audible signal off. For more details, contact a SUBARU dealer.
NOTE
For models with the multi function display, the setting can be changed by operating the multi function display.
For details, refer to "Keyless buzzer volume setting" 3-78.
Door unlock selection function
The door unlock selection function makes
the following operations possible.
Unlocking the driver's door without
unlocking any other doors (including the
rear gate) when gripping the driver's ...
Warning chimes and warning indicator
The warning chime and the access key
warning indicator are used for the following
purposes.
Minimizing improper operations when
using the keyless access with push-button
start system
Helpi ...
Other materials:
Installation
MECHANICAL(H4DO) > Cylinder BlockINSTALLATION1. Apply engine oil to the crankshaft bearing, and install the crankshaft bearing to the cylinder block.CAUTION:• Place a wood board wrapped with a waste cloth to prevent the knock pin damage and to stabilize the cylinder block before work.• ...
Dtc p0453 evap system (cpc) pressure sensor/switch circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0453 EVAP SYSTEM (CPC) PRESSURE SENSOR/SWITCH CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mod ...
Removal
GLASS/WINDOWS/MIRRORS > Outer Mirror AssemblyREMOVALRefer to “DISASSEMBLY” for removal procedures of scalp cap and mirror face. Outer Mirror Assembly > DISASSEMBLY">1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE&quo ...
