Subaru Crosstrek Service Manual: Rear regulator and motor assembly

Removal

GLASS/WINDOWS/MIRRORS > Rear Quarter GlassREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear pillar UPR. Rear Quarter Trim > REMOVAL">3. ...

Inspection

GLASS/WINDOWS/MIRRORS > Rear Regulator and Motor AssemblyINSPECTION1. Disconnect the connector of the motor - rear.2. Check the motor operation when battery voltage is applied between terminals of ...

Other materials:

Inspection
GLASS/WINDOWS/MIRRORS > Outer Mirror AssemblyINSPECTION1. CHECK OPERATION1. Disconnect the outer mirror connector.2. Apply battery voltage between the outer mirror connector terminals and check the mirror operation.Terminal No.Inspection conditionsSwitch position — — OFF3 (+) — 8 (−) ...

Disassembly
CLUTCH SYSTEM > Master CylinderDISASSEMBLY1. Remove the straight pin and nipple.(A)Nipple(B)Straight pin2. Remove the oil seal.(A)Oil seal3. Move the seat towards the rear.(A)Seat(B)Master cylinder4. Remove the piston stop ring.CAUTION:When removing the piston stop ring, be careful to prevent the ...

Rear gate - if the rear gate cannot be opened
In the event that you cannot open the rear gate by operating the rear gate opener button, you can open it from inside the cargo area. 1. Remove the access cover at the bottom-center of the rear gate trim using a flat-head screwdriver wrapped with vinyl tape or a cloth. 2. Locate the re ...