Subaru Crosstrek Owners Manual: Pandora(if equipped)
Pandora is an application for a smartphone.
This can automatically select and play recommended tracks.
By rating the track currently playing, tracks that better match your preference will be recommended.
In order to connect to this system, use a USB port for an iPhone or iPod touch and Bluetooth for Android devices.
Depending on differences between models or software version etc., some models might be incompatible with this system.
This function is not available if the Pandora application has not been installed on the smartphone.
WARNING
Do not operate the player's controls or connect the smartphone while driving. Doing so may result in loss of control of your vehicle and cause an accident or serious injury.
CAUTION
- Do not leave your smartphone in the car. In particular, high temperatures inside the vehicle may damage the smartphone.
- Do not push down on or apply unnecessary pressure to the smartphone while it is connected as this may damage the smartphone or its terminal.
- Do not insert foreign objects into the port as this may damage the smartphone or its terminal.
NOTE
Follow the specific operation procedures for the smartphone application.
Using aha application
1. When the top screen is displayed,
touch the station key.
Example of the main screen
2. Select the desired station from the list.
The selected station is displayed.
NOTE
The followin ...
Control screen and audio panel
Select to display the audio source
selection screen.
Select to open the station list. Refer to
"Station list" F5-51.
Select to skip the current track.
The track pauses when touched du ...
Other materials:
Disassembly
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingDISASSEMBLYUsing the ST or a hydraulic press, push out the hub bolt (b) from the rear hub unit bearing (a).CAUTION:• Be careful not to hammer the hub bolts. This may deform the hub unit bearing.• Do not reuse the hub bolt.NOTE:Since the rear h ...
General scan tool Operation
ENGINE (DIAGNOSTICS)(H4DO) > General Scan ToolOPERATION1. HOW TO USE GENERAL SCAN TOOL1. Prepare a scan tool (general scan tool) required by SAE J1978.2. Connect the general scan tool to data link connector located in the lower portion of the instrument panel (on the driver’s side).3. Using ...
Removal
EXTERIOR/INTERIOR TRIM > Sun VisorREMOVAL1. Remove the sun visor assembly.(1) Remove the cap - sun visor, and then remove the screws.(2) Disconnect the connector and remove the sun visor assembly.2. Remove the hook - sun visor.(1) Press both sides using a flat tip screwdriver.(2) Remove the hook ...
