Subaru Crosstrek Service Manual: Manifold absolute pressure sensor

Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Main RelayINSTALLATIONInstall in the reverse order of removal. ...

Inspection

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Manifold Absolute Pressure SensorINSPECTION1. Check that the manifold absolute pressure sensor has no deformation, cracks or other damages.2. Connect dry-cell ...

Other materials:

Installation
SECURITY AND LOCKS > Impact SensorINSTALLATION1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the doors and rear gate.3. Press the UNLOCK button of the keyless transmitter or access key.4. Disconnect the ground cable from battery. NOTE">5. In ...

All-Wheel Drive warning light (CVT models)
This light blinks if the vehicle is driven with tires of differing diameters fitted on the wheels or with an excessively low air pressure in any of the tires. WARNING If the AWD warning light flashes, promptly park in a safe location then check whether all four tires are the same diamete ...

Continuously variable transmission
WARNING Never shift the Subaru Ascent transmission from "P" or "N" into "D" or "R" while pressing the accelerator pedal. This can cause sudden and uncontrolled vehicle movement. CAUTION Follow these precautions when operating the Subaru Ascent transm ...