VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC C0057 VDC INTERRUPTED DUE TO EGI REASON
DTC DETECTING CONDITION:
Cooperation control prohibition of ECM
TROUBLE SYMPTOM:
• VDC does not operate.
• EyeSight does not operate.
NOTE:
• For the diagnostic procedure, refer to “DTC C0057 ECM CONTROL SYSTEM”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C0057 ECM CONTROL SYSTEM">
• Warning lights go off if the cooperation control of ECM returns.
Dtc c0056 g sensor signal
Dtc c0071 no signal from steering angle sensorDtc c0025 rear right abs sensor circuit open or short
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0025 REAR RIGHT ABS SENSOR CIRCUIT OPEN OR SHORTNOTE:For the diagnostic procedure, refer to “DTC C0027 REAR LEFT ABS SENSOR CIRCUIT OPEN OR SHORT”. Diagnostic Procedure with Dia ...
Passive arming (models without "keyless access with push-button start
system")
Passive arming mode
When passive arming mode has been
programmed by the dealer, arming of the
system is automatically accomplished
without using the remote transmitter. Note
that in this mode, DOORS MUST BE
MANUALLY LOCKED.
Passive arming mode
When passive arming mode has been
programmed by ...
Preparation tool
FRONT SUSPENSION > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS927680000INSTALLER & REMOVER SETUsed for replacing the bushing front - front arm of front arm assembly.20299AG000REMOVER• Used for replacing the bushing rear - front arm of fron ...