Subaru Crosstrek Service Manual: Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Main Relay
INSTALLATION
Install in the reverse order of removal.
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Main RelayREMOVAL1. Disconnect the ground cable from battery.2. Remove the glove box. Glove Box > REMOVAL">3. Remove the main relay from relay bloc ...
Other materials:
Disassembly
DRIVE SHAFT SYSTEM > Rear Drive ShaftDISASSEMBLY1. Remove the outer race (DOJ) from the shaft assembly.CAUTION:Be careful not to damage the boot.(1) Using a flat tip screwdriver or pliers, loosen the boot band on the large end of boot (DOJ).CAUTION:Be careful not to damage the boot.(2) Remove the ...
State emission testing (U.S. only)
WARNING
When performing emission testing on a Subaru Ascent equipped with All-Wheel
Drive (AWD), only a four-wheel dynamometer must be used.
Under no circumstances should the Subaru Ascent be tested on a two-wheel dynamometer.
Doing so can cause uncontrolled wheel rotation, leading to danger ...
Select lever
Select lever positions
Select lever button
With the brake pedal depressed,
shift
while pressing the select lever button in.
Shift while pressing the select
lever
button in.
Shift without pressing the
select lever
button.
The select lever has four positions, "P",
"R", "N", ...
