Subaru Crosstrek Service Manual: Function setting (customize)

Installation

SECURITY AND LOCKS > Front Outer HandleINSTALLATION1. Before installation, check the following items.• Rod is free from deformation.• Grease is applied sufficiently to rod joints.If gre ...

Operation

SECURITY AND LOCKS > Function Setting (Customize)OPERATIONDisabling/Activating the keyless access systemThe following functions are disabled when the keyless access system functions are disabled:&b ...

Other materials:

Note
LIGHTING SYSTEM > Auto Headlight Beam Leveler SystemNOTEFor operation procedures of each component of the auto headlight beam leveler system, refer to the respective section.• Auto headlight beam leveler CM: Auto Headlight Beam Leveler Control Module">• Vehicle height sensor: ...

Dtc b16f4 side airbag sensor rh recognition error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B16F4 SIDE AIRBAG SENSOR RH RECOGNITION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Side airbag sensor RH is misinstalled.• Airbag CM is faulty.CAUTION:Before performing d ...

Relay and fuse
Inspection Blind Spot Detection/Rear Cross Traffic Alert > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness. Location Blind Spot Detection/Rear Cross Traffi ...