Subaru Crosstrek Service Manual: Operation
SECURITY AND LOCKS > Function Setting (Customize)
OPERATION
Disabling/Activating the keyless access system
The following functions are disabled when the keyless access system functions are disabled:
• LOCK function performed by the operation of touch sensor on the door outer handle
• Rear gate LOCK function by rear lock button operation
• UNLOCK function by holding the door handle
• Rear gate open function by rear gate opener button operation in the rear gate lock condition
• Lockout prevention feature
• Warning function
• Engine starting control using keyless access collation
Procedure
SECURITY AND LOCKS > Function Setting (Customize)PROCEDURE1. METHOD FOR STOPPING KEYLESS ACCESS SYSTEM FUNCTION BY OPENING/CLOSING DOORS1. Check that the vehicle status is as follows:• Igniti ...
Other materials:
Removal
SECURITY AND LOCKS > Rear Door Latch and Door Lock Actuator AssemblyREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear door. Door Trim > REMOVAL">3. Remove the sealing cover - rear door. Rear Sealing Cover > REMOVAL">4. Remov ...
Continuously variable transmission
WARNING
Do not shift from the "P" or "N"
position into the "D" or "R" position
while depressing the accelerator
pedal. This may cause the vehicle
to jump forward or backward.
CAUTION
Observe the following precautions.
Failure to observe these
precautions could cause damage
to the transmi ...
Assembly
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingASSEMBLY1. Install the rear hub unit bearing to the ST securely.Preparation tool:ST: HUB STAND (927080000)(1)Rear hub unit bearing2. Using a press, press new hub bolts (b) until their seating surfaces contact the rear hub unit bearing (a).NOTE:Use the 12 ...
