Subaru Crosstrek Service Manual: Extension case

Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Drive PlateINSTALLATION1. Temporarily install the drive plate and reinforcement drive plate.NOTE:Align the knock pin hole of the crankshaft position sens ...

Adjustment

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Extension CaseADJUSTMENTNOTE:When replacing the extension case, select the transfer drive gear shim and transfer driven gear shim. Reduction Drive Gear ...

Other materials:

Starting and stopping the engine (models without push-button start system)
CAUTION When operating the Subaru Ascent starter motor, never crank the engine continuously for more than 10 seconds. If the engine of the Subaru Ascent does not start within 5 to 10 seconds, stop cranking and wait at least 10 seconds before attempting again. This pause helps prevent overh ...

Dtc p0730 incorrect gear ratio
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0730 INCORRECT GEAR RATIODTC detecting condition:Immediately at fault recognitionTrouble symptom:• Acceleration is poor during standing start.• Shift control malfunction&bull ...

Id code box Note
SECURITY AND LOCKS > ID Code BoxNOTENOTE:• Equipped on C5 model with keyless access with push button start.• The ID code box is located at the place of security control module.Refer to “Security Control Module” for operation procedures on ID code box. Security Control Mod ...