Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc p015b a/f / o2 sensor delayed response - lean to rich bank 1 sensor 1

Subaru Crosstrek Service Manual / Engine (diagnostics)(h4do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p015b a/f / o2 sensor delayed response - lean to rich bank 1 sensor 1

ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC P015B A/F / O2 SENSOR DELAYED RESPONSE - LEAN TO RICH BANK 1 SENSOR 1

NOTE:

For the diagnostic procedure, refer to DTC P014C. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P014C A/F / O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 1">

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC P015A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P015A A/F / O2 SENSOR DELAYED RESPONSE - RICH TO LEAN BANK 1 SENSOR 1">

Dtc p015a a/f / o2 sensor delayed response - rich to lean bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P015A A/F / O2 SENSOR DELAYED RESPONSE - RICH TO LEAN BANK 1 SENSOR 1NOTE:For the diagnostic procedure, refer ...

Dtc p0171 system too lean bank 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0171 SYSTEM TOO LEAN BANK 1Refer to DTC P0172 for diagnostic procedure. Diagnostic Procedure with Diagnosti ...

Other materials:

Clear memory mode Operation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Selec ...

Operation
ENTERTAINMENT > Audio SystemOPERATION1. SUBARU STARLINK CONNECTION ID DISPLAYModel with 6.2 inch display1. Turn the ignition switch to ACC.2. Press the HOME button (a) to display the {HOME} screen.3. Touch the {SETTINGS} (b) to display the {SETTINGS} screen.4. Touch the {Settings General} (c) to ...

Installation
FRONT SUSPENSION > Front StrutINSTALLATION1. Install the strut mount - front at the upper side of the strut to the body, and tighten it with new flange nuts.Tightening torque:20 N·m (2.04 kgf-m, 14.8 ft-lb)2. Align alignment marks on the camber adjusting bolt and strut.Using new self-locki ...

© 2016-2024 Copyright www.sucross.com