Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc c2323 transmitter 3 function code abnormal

TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC C2323 TRANSMITTER 3 FUNCTION CODE ABNORMAL

NOTE:

Refer to DTC C2324 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">

Dtc c2322 transmitter 2 function code abnormal
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2322 TRANSMITTER 2 FUNCTION CODE ABNORMALNOTE:Refer to DTC C2324 for diagnostic procedure ...

Dtc c2324 transmitter 4 function code abnormal
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMALDetected when error data is received from each t ...

Other materials:

Function check Operation
BODY CONTROL SYSTEM (DIAGNOSTICS) > Function CheckOPERATIONNOTE:In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» displ ...

Removal
VEHICLE DYNAMICS CONTROL (VDC) > VDC OFF SwitchREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the cover assembly - instrument panel LWR driver OUT. Instrument Panel Lower Cover > REMOVAL">3. Remove the screws and release the claws, then detach the cover.4 ...

Installation
CLUTCH SYSTEM > Operating CylinderINSTALLATION1. Install in the reverse order of removal.NOTE:• Before installing the operating cylinder, apply grease to the contact point of the release lever and operating cylinder.Grease:NICHIMOLY N-130 or equivalent• Be sure to install the clutch h ...

© 2016-2022 Copyright www.sucross.com