CAUTION
NOTE
Initialize the power window to reactivate the anti-entrapment function. Refer to "Initialization of power window" 2-37.
While closing the driver's window automatically, if the window senses a substantial enough object trapped between the window and the window frame, it automatically moves down slightly and stops.
Operating the driver's window
Operating the passengers' windowsInspection
DRIVE SHAFT SYSTEM > Front Hub Unit BearingINSPECTION1. Moving the front tire up and down by hand, check there is no looseness in bearing, and check the wheel rotates smoothly.CAUTION:If there is unsmooth sliding operation or abnormal noise in the bearing, replace the hub unit bearing.2. Inspect ...
Installation
MECHANICAL(H4DO) > Cylinder BlockINSTALLATION1. Apply engine oil to the crankshaft bearing, and install the crankshaft bearing to the cylinder block.CAUTION:• Place a wood board wrapped with a waste cloth to prevent the knock pin damage and to stabilize the cylinder block before work.• ...
Dtc c1542 clutch switch on malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1542 CLUTCH SWITCH ON MALFUNCTIONDTC detecting condition:Abnormal clutch signalTrouble symptom:Hill start assist does not operate.NOTE:Depending on the user clutch operation patterns, the hi ...