WARNING
To avoid serious personal injury caused by entrapment, always conform to the following instructions without exception.
The power windows operate only when the ignition switch is in the "ON" position
Child safety locksDisassembly
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorDISASSEMBLY1. Remove the cap from the generator.2. Remove four bolts.3. Use a drier to heat the rear cover (A) portion to 50 — 60°C (122 — 140°F).4. Insert a flat tip screwdriver or similar tool wrapped with protective tape into ...
Removal
SECURITY AND LOCKS > IG Relay2 (Push Button Start)REMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground cable from battery ...
Inspection
LIGHTING SYSTEM > Light Control SensorINSPECTION1. Turn the ignition switch to ON.2. Set the lighting switch to AUTO position.3. Check the voltage between the sensor terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandardConnection diagram2 (+) — 1 (−)Measure th ...