Subaru Crosstrek Service Manual: Dtc c2324 transmitter 4 function code abnormal

Detected when error data is received from each transmitter at a vehicle speed of 40 km/h (25 MPH) or more.

DTC DETECTING CONDITION:

Unexpected function codes received from each transmitter.

TROUBLE SYMPTOM:

Tire pressure warning light blinks 25 times and then illuminates.

1.REPRODUCTION OF FAILURE.

1) Perform the drive test.

Drive the vehicle at 40 km/h (25 MPH) or faster for at least 10 minutes.

2) Read the DTC of tire pressure monitoring. Read Diagnostic Trouble Code (DTC) > OPERATION">

Is DTC displayed as “Present fault”?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 2.

When DTC is displayed as “Past faults”, the system has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.

NOTE:

In this case, there may be temporary poor communication due to radio wave environment inside/outside the vehicle.

2.START FRONT LEFT TRANSMITTER.

1) Connect the Subaru Select Monitor and then turn the ignition switch to ON.

2) Select «Data monitor» of the tire pressure monitor. Read Current Data">

3) Use the transmitter registration tool and transmit the ID from the front left transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 3.

Replace the front left transmitter. Tire Pressure Monitoring System">

3.CHECK FRONT LEFT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 1».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 4.

Record «Latest reception ID» as the front left. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 4.

4.START FRONT RIGHT TRANSMITTER.

Use the transmitter registration tool and transmit the ID from the front right transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 5.

Replace the front right transmitter. Tire Pressure Monitoring System">

5.CHECK FRONT RIGHT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 2».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 6.

Record «Latest reception ID» as the front right. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 6.

6.START REAR RIGHT TRANSMITTER.

Use the transmitter registration tool and transmit the ID from the rear right transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 7.

Replace the rear right transmitter. Tire Pressure Monitoring System">

7.CHECK REAR RIGHT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 3».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 8.

Record «Latest reception ID» as the rear right. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 8.

8.START REAR LEFT TRANSMITTER.

Use the transmitter registration tool and transmit the ID from the rear left transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 9.

Replace the rear left transmitter. Tire Pressure Monitoring System">

9.CHECK REAR LEFT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 4».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 10.

Record «Latest reception ID» as the rear left. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 10.

10.CHECK MALFUNCTION TRANSMITTER.

Is ID recorded by this procedure?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 11.

Replace the transmitter indicated by diagnostics trouble code (DTC). Tire Pressure Monitoring System">

11.CHECK MALFUNCTION TRANSMITTER.

Check the registered ID of the transmitter indicated by DTC.

Is there checked ID in the record?

Replace the transmitter of the recorded position. Tire Pressure Monitoring System">

Replace the transmitter indicated by diagnostics trouble code (DTC). Tire Pressure Monitoring System">

Dtc c2323 transmitter 3 function code abnormal

Dtc c2421 transmitter 1 battery voltage low

Other materials:

System operation
The alarm system will sound the following alarms when triggered. The vehicle's horn will sound for 30 seconds. The hazard warning flashers will flash for 30 seconds. If any of the doors or the rear gate remains open after the 30-second period, the horn will continue to sound for a ma ...

Inspection
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostics with PhenomenonINSPECTION(1) Perform the diagnosis according to the diagnostic procedure of the corresponding symptom that is shown in the symptom list.(2) If there are multiple symptoms, perform the diagnosis in the symptom sequence (1 > 2 &g ...

Removal
EXTERIOR BODY PANELS > Door Sash TapeREMOVAL1. FRONT DOOR1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the outer mirror assembly. Outer Mirror Ass ...