Subaru Crosstrek Service Manual: Cruise control system
- Cruise control command switch
- Cruise control system
- Clutch switch Note
- Combination meter Note
- Control unit Note
- Diagnostics with phenomenon Inspection
- Inhibitor switch Note
- Neutral position switch Note
- Stop light brake switch Note
- Transmission control module (tcm) Note
Subaru select monitor Operation
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Subaru Select MonitorOPERATION1. GENERAL DESCRIPTIONThe on-board diagnosis function of the cruise control system uses Subaru Select Monitor.The on-board diagno ...
Other materials:
Regarding setting
NOTE
The operational/non-operational
setting for the keyless access function
can be changed. For the setting procedure,
refer to "Disabling keyless access
function" 2-17. The setting can
also be changed by a SUBARU dealer.
For more details, contact a SUBARU
dealer.
For detailed ...
Steps for Determining Correct Load Limit
1. Locate the statement "The combined
weight of occupants and
cargo should never exceed XXX
kg or XXX lbs." on your vehicle's
placard.
2. Determine the combined weight
of the driver and passengers that
will be riding in your vehicle.
3. Subtract the combined weight of
the driver and pas ...
Installation
CLUTCH SYSTEM > FlywheelINSTALLATION1. Press in a new pilot bearing to the position where it is flush with the flywheel surface or up to 0.4 mm (0.016 in) deeper than that.CAUTION:Do not press the bearing inner ring.(A)Pilot bearing2. Temporarily tighten the crankshaft position sensor plate and f ...
