Subaru Crosstrek Service Manual: Combination switch (light)
Installation
LIGHTING SYSTEM > Clearance/Parking Light BulbINSTALLATIONInstall each part in the reverse order of removal. ...
Inspection
LIGHTING SYSTEM > Combination Switch (Light)INSPECTIONMeasure the resistance between connector terminals. If it is not within the standard value, replace the switch assembly - combination turn dimm ...
Other materials:
Procedure
SECURITY AND LOCKS > Function Setting (Customize)PROCEDURE1. METHOD FOR STOPPING KEYLESS ACCESS SYSTEM FUNCTION BY OPENING/CLOSING DOORS1. Check that the vehicle status is as follows:• Ignition switch OFF• One window is completely open• Keyless access system is activated (or dis ...
Service mode (models without "keyless access with push-button start system")
In service mode, the remote engine start
function is temporarily disabled to prevent
the system from unexpectedly starting the
engine while being serviced.
To engage or disengage service mode:
1. Enter the vehicle and close all vehicle
doors and the rear gate.
2. Verify that the select le ...
Removal
EXTERIOR BODY PANELS > Front Sealing CoverREMOVAL1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the sealing cover - front door.CAUTION:• Caref ...
